# 1-800-352-4776
Home >

SunSetter Topflight Top Cap Replace Part FP011-1

SunSetter Topflight Top Cap Replace Part FP011-1


Assorted replacement parts for your SunSetter Topflight Telescoping Flagpole.

Tools Needed:

  • Phillips Screwdriver

Parts Supplied:

  • Mounting Screws (2)
  • FP011-1 Top Cap Assembly

1. Remove the gold ball by loosening the gold nut and unscrewing the gold ball. 

2. Remove the two cap mounting screws and remove the plastic top cap (the piece that the gold ball screws into.) 

3. Separate the top cap from the top swivel. Note the orientation of the swivel. 

4. Slide the top swivel onto the new top cap with the correct orientation, with the lip towards the top of the pole. 

5. Slide the assembly onto the pole and align the two holes in the top cap with the two holes in the tube. 

6. Install the two screws. DO NOT over tighten the screws as this may keep the top swivel from working smoothly. 

7. Test the flagpole for proper operation.

We do offer combined shipping rates.  Just purchase the items and we will send you out an invoice for the items.

If you have any additional questions, please let us know.


Top Cap Assembly with mounting screws

Part Number FP011-1

Item Number: FP011-1