# 1-800-352-4776
 
Home >

SunSetter Topflight Tube #3 Bottom Cap Part FP015-1

SunSetter TopFlight Replacement Flagpole Parts

freeship.jpg

Assorted replacement flagpole parts for your SunSetter Topflight Telescoping Flagpole.  When you look for places to buy American flags or flagpole parts, Flagpro has the best selection and you can rest assured that all of our outdoor American flags for sale are made in the U.S.A. 

Tools Needed:

 

  • Phillips screwdriver

 

Parts Supplied:

 

  • FP015-1 #3 Bottom Cap Assembly
  • Mounting Screws (2)

 

1. Remove the top three sections of the pole by holding in the bottom button while extending the section upwards and sliding the top three sections completely out of tube #4. 

2. Remove the bottom cap mounting screws and remove the bottom cap. 

3. Align the slot in the bottom cap with the track inside the tube and slide the new bottom cap into the tube. 

4. Install the two new bottom cap mounting screws. 

5. Place the top three sections of the pole back into tube #4. Lower them slowly until the button pops out of the hole in tube #4. Be sure to line up the slot in the bottom cap with the track on the inside of the tube. 

6. Test the flagpole for proper operation.

Specifications:

Tube #3 Bottom Cap

Part Number FP015-1

Item Number: FP015-1
$15.00
Quantity: