# 1-800-352-4776
Home >

SunSetter Topflight Tube #1 Bottom Cap Part FP017-1

SunSetter TopFlight Replacement Flagpole Parts


Assorted replacement flagpole parts for your SunSetter Topflight Telescoping Flagpole.  When you look for places to buy American flags or flagpole parts, Flagpro has the best selection and you can rest assured that all of our outdoor American flags for sale are made in the U.S.A. 

Tools Needed:


  • Phillips screwdriver


Parts Supplied:


  • FP017-1 #1 Bottom Cap Assembly
  • Mounting Screws (2)


1. Extend the top section up until the button pops out. Remove the top section of the pole by holding in the button while extending the section upwards and out of pole #2. 

2. Remove the bottom cap mounting screws and remove the bottom cap. 

3. Align the slot in the bottom cap with the rib inside the tube and slide the bottom cap into the tube. 

4. Install the two bottom cap mounting screws. 

5. Place tube #1 back into the main tube assembly. Lower it slowly until the button pops out of the hole in tube 2. Be sure to line up the slot in the bottom cap with the track on the inside of the tube. 

6. Test the flagpole for proper operation.


Tube #1 Bottom Cap

Part Number FP017-1

Item Number: FP017-1