Retainer rings are generally used with internal halyard flagpoles providing a means of keeping the the bottom of the flag close to the pole and as an aid to raise and lower the flag. Retainer rings can also be used on large multi-grommet flags on both external and internal halyard flagpoles as a means to keep the flags close to the pole and reduce the strain on upper and lower grommets of the flag.
Available in the colors of White, Bronze #313, Silver, and Black.
These beaded rings are constructed of either 1" or combination of 1" & 2" diameter nylon balls strung onto 1/8" stainless steel aircraft cable with a stainless steel thimble attached to each end with two copper crimps. 1" nylon balls up through 12" diameter poles. 1" & 2" nylon balls on 13" diameter and above poles.
Comes with stainless steel quick link. The length of each retainer ring was determined by measuring from the outside tip of each thimble, less the quick link.
This is one of the many internal and external halyard flagpole replacement parts that we have within the Flagpro store.
| Pole Butt Diameter (Circumference) |
Retainer Ring Length |
Diameter of Balls |
| 5" (15.708") |
30" |
1" |
| 6" (18.8496") |
34" |
1" |
| 7" (21.9911") |
38" |
1" |
| 8" (25.1327") |
42" |
1" |
| 10" (31.4159") |
50" |
1" |
| 11" (34.5575") |
54" |
1" |
| 12" (37.6991") |
58" |
1" |
| 13" (40.8407") |
66 3/8" |
1" & 2" |
| 14" (43.9823") |
70 1/2" |
1" & 2" |
| 16" (50.2655") |
78 1/2" |
1" & 2" |
| 18" (56.5487") |
86 1/2" |
1" & 2" |
| 20" (62.8319") |
94 1/2" |
1" & 2" |
| 22" (69.1150") |
102 1/2" |
1" & 2" |
| 24" (75.3982") |
110 1/2" |
1" & 2" |
| 30" (94.2478") |
134" |
1" & 2" |
| 32" (100.531") |
142" |
1" & 2" |
| 34" (106.8142") |
152" |
1" & 2" |
| 36" (113.0973") |
158" |
1" & 2" |
