# 1-800-352-4776
 
Home >

SunSetter Topflight Tube #1 Bottom Cap Part FP017-1

SunSetter Topflight Tube #1 Bottom Cap Part FP017-1

freeship.jpg

Assorted replacement parts for your SunSetter Topflight Telescoping Flagpole.

Tools Needed:

 

  • Phillips screwdriver

 

Parts Supplied:

 

  • FP017-1 #1 Bottom Cap Assembly
  • Mounting Screws (2)

 

1. Extend the top section up until the button pops out. Remove the top section of the pole by holding in the button while extending the section upwards and out of pole #2. 

2. Remove the bottom cap mounting screws and remove the bottom cap. 

3. Align the slot in the bottom cap with the rib inside the tube and slide the bottom cap into the tube. 

4. Install the two bottom cap mounting screws. 

5. Place tube #1 back into the main tube assembly. Lower it slowly until the button pops out of the hole in tube 2. Be sure to line up the slot in the bottom cap with the track on the inside of the tube. 

6. Test the flagpole for proper operation.

Specifications:

Tube #1 Bottom Cap

Part Number FP017-1



Item Number: FP017-1
$15.00
Quantity: